HYPER-CLEANSE: is used for cleaning, dehydrating, and disinfecting the nail plate. This product is always applied with a clean surgical grade applicator swab, DO NOT USE A BRUSH. With a applicator swab, rub Hyper-Cleanse into the entire nail plate until it is  squeaky clean on all surface areas and free edges. This product air-dries in about 10-30 seconds, depending on the humidity in your area. This product is an anhydrous 2 propanol, which is anhydrous (water free) alcohol.

Hyper-Cleanse is available in two sizes:

	4 oz.
	16 oz. Professional

BRUSH-REVIVE: is used for cleaning the brush ONLY. This product is a solvent and should NEVER be used on the clients nails or skin. Dip your brush directly in the bottle then wipe on clean paper towel. Use natural fiber brushes only, ie: sable, or natural hair only. NEVER use to clean synthetic fiber brushes, i.e.: nylon, or tacklon. Store in glass containers only.

Brush-Revive is available in a tri-pack:

Three ½ oz. Bottles

HYPER-FUSE: is an organic bonding agent. To apply saturate a clean applicator swab with Hyper-Fuse rub vigorously into natural nail plate. NEVER apply with a brush. For best results, always apply two heavy coats and be sure to apply it to the free edges, so that the overlay will wrap around the free edge and bond to the entire nail. Wait 60 seconds minimum for product to seek out the keratin and amino acid in the nail plate to bond too. Dip your swab for each nail. The nail should appear wet and shinny. This product is NOT a primer. It contains no acid. It will NOT burn you or your clients.

Hyper –Fuse is available in one size:

½ oz.

HYPER-BASE: is the primary overlay product used on the nail for adding instant strength or length. HYPER-BASE cures under UV light, tack free with a high shine finish in only one minute. It looks like glass on the natural nail. It feels light and natural, yet is stronger then any acrylic or gel. This product gives you beautiful, strong, natural looking and natural feeling nails. Make sure you wrap this product around the free edge of the nail. Keep off the skin, use a manicure stick to make a free margin between the product and the skin. 

(Do not expose this product to direct UV Light the product will cure. You do not want to sit by a window or halogen light or any UV light source. Product can be affected by temperature changes. 

Hyper-Base is available in two sizes:

	15 gram
	35 gram Professional

HYPER-BUILD: is thicker in viscosity then Hyper-Base. This product cures under UV light, tack free with high shine finish in only one minute. The primary use for Hyper-Build is for sculpted nails and arches. It can be used in place of, or in conjunction with the Hyper-Base. Many of our professionals prefer the Hyper-Build, because it stays in place longer then the Hyper-Base. The flow characteristics are similar with slower movement.

Hyper-Build is available in two sizes:

	15 gram
	35 gram Professional

HYPER-SHEER: is a slightly cloudy version of the Hyper-Base. A small amount of white pigment has been added to the product to give it a cloudy appearance. Its primary use is too help conceal tip lines if the tip is not blended completely. If your client has uneven natural color at the free edge, this product will help to conceal the problem and even out the color of their free edges. It cures under UV light in only one minute. This product can be used for a White on White Wedding French.

Hyper-Sheer is available in one size:

15 gram

HYPER-FINISH: primary use is for restoring shine without adding thickness to the nail. It is crystal clear and cures under UV light in one minute. Use Hyper-Finish over any of the other polymers listed above. This product is NOT for added strength, just for adding that high shine finish that everyone loves. If you have to buff or file to shape or perfect the existing product on the nail, or to put on nail polish just add a coat of Hyper-Finish to restore the high gloss shine. Hyper-Finish can be put over nail polish once it has dried to keep the polish from chipping and wearing on the free edge.

Hyper-Finish is available in one size:

15 gram

UV- BRITE: with the growing popularity of tanning beds and extended exposure to sun light, all nail products can at some point discolor or yellow. This unique product contains a UV blocker and an optical brightener. The UV-Brite makes the French White appear even whiter and optimizes the effect of nail polish colors. UV-Brite will prevent yellowing of the Quintessence Products. This product air-dries in about 1 ½ to 3 minutes, apply just like a polish. Apply one thin coat after you have completed your nail application. It can also be used to restore the shine.

UV-Brite is available in one size:

15 gram

QUINTESSENCE COLORS: the colors are a polymer NOT a polish. Cure all colors under a UV Lamp for 1 ½ minutes. Apply one thin coat for a sheer look, two thin coats for more intense color, if you get the product on to thick it will not cure through. The Quintessence Colors cannot be remove with acetone or any other nail polish remover. They must be filed off. To remove color, file it off with a 100 grit file. When all the color is removed you will still have a clear base coat to protect the natural nail from the file. Because of this fact, always overlay the natural nail first with Hyper- Base or Hyper-Build, fully cure that product, then buff off the shine and apply the color.

The Quintessence Colors are available in the following Colors:

All of the colors must be stirred well before use. Because they are polymers, you cannot shake them to re-suspend the pigments, like nail polish. Open the top and stir the product with the wooden end of an applicator swab or orange wood stick. The colors can be mixed with each other, to create about 20,000 colors. Have your clients help with the mixing of their own personal color and let them name it. You can use as you would any nail polish, French Manicures or be creative and do nail art. It’s GREAT for pedicures too! Buff toe nails and Hyper-Cleanse then apply Quintessence Color. Apply one thin coat to toes and cure for 1½ minutes. Put your shoes on and your ready to GO! Do not Hyper-Fuse Quintessence colors to the natural toe nails.

The Quintessence Color System will make it possible to do as many different, fun and exciting color applications that you can think of.

15 Gram

QUINTESSENCE UV LIGHT: this light is the lowest intensity UV light made. It will not tan your hands. It has a single 6 watts bulb. Our products have been custom engineered to cure fastest under Near UV.

(Other lights are more intense, but they can be use to cure our product. Cure time with an alternative light will be longer. You will also run the risk of a more intense heat spike. We cannot guarantee the results when using a UV-Lamp other than the Quintessence UV-Lamp).

The nail implements and supplies that are sold by QNET GLOBAL for the application and maintenance of the Quintessence Nail Care Products have been tested and chosen because of their high quality and the suitability to perform in conjunction with our products.